Your Premier Electrical Enclosure Supplier

Electrical Enclosure: The Complete Guide for Importers

If you’re looking for an electrical enclosure, then this article is for you.

Reason?

I am going to take you through every important aspect about the electrical enclosure.

From electrical enclosure design, material, safety standards, installation, etc. – you’re going to learn everything here.

Guess what, by the end of this guide, you will be an expert in electrical enclosures.

What is an Electrical Enclosure?

Broadly speaking, an electrical enclosure refers to a casing for electrical and electronic components and equipment.

It somewhat looks like a cabinet and has doors which are incidentally lockable to for safety and preventing interference from unauthorized personnel.

Different types of electrical enclosures

This equipment allows for mounting of items such as knobs, switches, as well as displays.

Well, the primary purpose of this tool is to protect the electrical and electronic parts.

Again, it helps to protect individuals from coming into contact with these components which can be hazardous.

Primarily, this equipment prevents you or any other person from possible electrical shock or propagating explosion.

It is also useful for protecting the electrical items from the environmental factors that would trigger accidental electrocution.

Interestingly, it is only the electrical enclosure that is visible among users.

In most cases, the design of this unit is always to fit the utilitarian reasons.

But in some instances, it can be designed to appeal to the eyes.

Nonetheless, the regulations may somewhat determine the specific properties and performance of these enclosures.

For instance, in areas regarded as high risk such as coal mines and petrochemical plants among others.

The bottom line, however, is that several factors tend to determine the packaging of these enclosures.

By the way, we will discuss more of these later on in this guide.

So ensure that you read it until the last paragraph.

For now, though, let’s first look at some of the common types of these equipment you’ll probably come across from time to time.

Benefits of Electrical Enclosure

Well, we all know that electrical devices generate heat hence raising the temperatures within the surrounding.

But for efficiency, it is only appropriate to make sure that you figure out effective ways of maintaining ideal temperatures of the instruments.

So the electric cages present quite a lot of benefits all round.

And since these are equipment that you’ve always seen in different environments, try to imagine life without them.

This way, you can be able to know the pros of these devices.

Electrical boxes

Clearly, it can be horrible, messy, hazardous and life-threatening in all aspects.

Some of the advantages of electrical enclosures include the following;

§ Enhances the Safety of Employees

As you’ll find out later on in this guide, almost all applications of electrical cages revolve around the involvement of people.

Mostly, I’m trying to say that in most of the uses of electrical enclosures, people are always within the surrounding.

So it is vitally important to safeguard the life and wellbeing or individuals as they undertake various tasks inside and outside the factory.

Use of electrical enclosures guarantees the safety of employees whom some work close to the locations of these items.

Ordinarily, the devices inside this cage can at time generate excess heat which tends to make the people around somewhat uncomfortable.

The workers can also get electrical burns and shock when they come into contact with any exposed electrical components.

And in the worst instances, they might as well succumb due to severe electrocution.

But electrical enclosures prevent such incidents from occurring.

It is also ideal because it prevents you from hefty avoidable compensation should employees file workplace injury lawsuit against you.

§ Improves Safety of Equipment

Typically, most electrical devices generate heat.

This heat can seriously damage the equipment in any case you do not find a way of removing it.

For instance, it can lead to insulation damage, failure of the entire system and in some instances failure of particular components.

So generally speaking, when you use electrical enclosure you can lower the temperatures of the heat that dissipate from the equipment.

Still, on the same subject, these enclosures prevent the devices from environmental elements such as chemicals, water, and dust.

What happens is that in many cases electrical appliances when openly exposed they risk getting in contact with such elements.

And so the cages enable them to stay away from such elements, which in a significant way safeguard them.

It is imperative because in a significant way it helps to enhance the durability of the equipment.

Consequently, it prevents you from unnecessary repairs or in some instances replacements.

And as you know, safe equipment increases efficiency hence improving overall productivity.

§ Reduces Risks of Fire

Overheated electrical equipment can easily explode or be a cause of the fire.

When the insulation damages, short-circuiting is more likely to occur which again results to fire.

High temperatures that the equipment generate also increases the likelihood of an explosion resulting from flammable elements.

And if you have flammable gases or vapor, the heat from the devices might as well increase chances of auto-ignition.

Incidentally, you can prevent all these from happening especially if you can have all the electrical equipment in a controlled setting.

And it is the reason it would be vital to have all such devices inside an electrical enclosure to prevent them from happening.

§ Ease of Operating

You see, the electrical cages often offer a central position for connection of all the electrical equipment.

And this is particularly important in relatively large industries or applications.

Fundamentally, synchronization of all these connections happens at this central point thus making it easy for you to operate the machines.

And this makes the entire production process quite easy, systematic and useful in a considerable aspect.

You wouldn’t necessarily need to repair the electrical system of the entire unit from specific equipment.

§ Appealing to the Eye

Yes, this is an advantage!

The design construction of electrical enclosures adds suitable attractiveness in the areas they’re located.

In fact, even the arrangement of the electrical devices inside this cabinet is incredible, well-organized and maintains visual appeal.

It is unlike leaving all the cables and switches scattered all around the premises of the factory or even the office.

So you’ll come to realize that these cages are also helpful in enhancing the overall appearance of the surrounding location.

Types of Electrical Enclosures

Different projects require a variety of electrical enclosures ranging from small wall mount to walk-in buildings.

So it generally means that you may need to use a specific type of cabinet depending on the type and size of the application.

Again, the applications also determine the type of electrical cage that you’ll use.

I know it can be somewhat hectic to make the right selection, especially if you aren’t sure of the exact one that you require.

But to make it easy for you, let me explain all the major types that you’ll possibly need for your particular project;

1. Floor Standing Electrical Enclosure

It is one of the most popular forms of electrical cabinets around.

This enclosure is fully sealed, usually on legs and often designed to stand on a relatively flat floor.

The legs of this floor standing electrical cage elevate it comparatively high to enable easy access.

Floor standing electrical enclosure

Another fundamental element of this cabinet is that it’s also easy to install. Indeed it’s the stands that facilitate this easy mounting thus reducing the chances of compromising the cage’s reliability.

In some instances, you may find other floor standing electrical enclosure comes with optional casters.

So the addition of these casters allows you to move the cabinet, in any event, you’d wish to relocate it to a specific position.

Most of these types of electrical cages are made of high-quality materials that enhance durability.

Furthermore, they come in different forms, but you can as well get a customized design that suits your specific needs.

Side view of floor standing electrical enclosure

What’s more is that they also come in different sizes. So it makes it possible for you to find the right size depending on the number of components you want to fit in.

And in many cases, the floor standing electrical enclosures are common in various industrial and large-scale applications.

2. Wall-mount Electrical Enclosure

This refers to a class of electrical cabinet common for housing electrical devices like switch gears, and instrumentation among others.

It is available in a wide range of off-the-shelf sizes, but you can as well get customized sizes from a reliable manufacturer.

Настенный электрический шкаф

Wall mount electrical cages are available in different in various types.

They include a single door, double door and integrated single and double door.

Ideally, different types of material can also be used to manufacture this electrical enclosure box.

Also, the particular application for this type of electrical cabinet is dependent on the selection of material.

For instance, you can go for stainless steel electrical enclosures for relatively hazardous and harsh environments.

Fundamentally, the design of wall mounted enclosures is for attachment to a flat wall surface.

3. Modular Electrical Enclosures

This type of enclosure is commonly designed to include electrical equipment or automation.

You can place them in different positions such as back to back, side by side or side to back depending on a few factors and preference.

Modular electrical enclosure

Nowadays, most manufacturers can deliver this unit either pre-assembled, in kit form or on request.

It’s vitally important because it makes your works somehow easy depending on the intention of the task.

A modular electrical enclosure has a galvanized construction making it ideal to reduce electromagnetic interferences.

Moreover, you obtain a specific configuration that meets the needs of your application and other elements including color and dimensions.

In general, a modular electrical enclosure is ideal for bearing advanced loads and harsh environment applications.

At the same time, it is easier to use and also faster to populate.

4. Junction Box Enclosure

This type of enclosure is also popular among various small-scale applications.

The design and construction of this unit are among some of the essential elements that give it an edge in the market.

Primarily, the design features a durable and economical continuous hinge which provides relatively smooth maximum axial rotation.

Junction box electrical enclosure

This design is fundamental because it provides easy access to the internal equipment

Also, it has a clamp cover style door which is entirely removable.

And the good thing is that it’s waterproof and resistant to corrosion.

The availability of a wide range of sizes and styles of this unit indicates that you can easily find a suitable one for your needs.

Moreover, you can get it in customized designs.

5. GRP Electrical Enclosures

GRP electrical enclosures are often common along roadsides used typically for storing street lights electrical components.

You can, however, find them also in other industrial applications as well as residential uses.

They come in two major designs that feature single or double doors as well as locking mechanisms to fit your needs.

Some also come with forced or natural ventilation depending on your preference as well as needs.

6. Pad Mount Enclosure

Also known as a ground mount box, refers to an electrical cabinet which features an open bottom and often mounted over a concrete pad.

You’ll realize that when installing this type of enclosure, you’ll need to add slotted holes.

The essence is to fit the anchor bolts which are fixed in the pad to lock the box.

If you’re looking for one to use on outdoor applications, the ideal material to go for would be stainless steel.

Pad mount electrical enclosure

And if you need it for indoor uses, you may go for other materials as long as they are resistant to various conditions.

They are suitable for several types of uses including traffic control, telecommunication, street lighting and solar power battery, etc.

However, due to the nature of the installation, you can rarely use them in large sizes, which can be disadvantageous at times.

7. Traffic Control Enclosure

As the name suggests, this refers to an electrical cabinet for holding a wide range of equipment related to road traffic control.

It’s mounted on various locations along the roads as well as space that experience traffic from time to time.

Traffic control enclosure – Photo courtesy: Western Telematic

You can find them in various materials, but in most instances, they come in stainless steel due to the nature of the environment of the installation.

An important aspect regarding these types of enclosures is that they tend to vary from one city or town.

Mainly it’s because each municipality has specific considerations when installing the traffic control boxes.

They also feature effective locking systems to enhance the security of the equipment from vandalism.

Also, the lockable mechanism enhances the safety of other road users from electrocution and electric shock among others.

8. Pole Mounted Electrical Box

Again, just as the name suggests, this type of electrical enclosure is installed on interior support poles, light poles, and outdoor phone poles.

They are ideal for a wide range of uses including garden lighting, street lighting, and other small-scale outdoor applications.

And since they are common for outdoor uses, it means that it’d be great to obtain one made of stainless steel material.

Электрический шкаф для монтажа на столбе

Alternatively, you can choose any other material you’re sure is resistant to unfavorable environmental conditions.

But in general, they’re always common in several small-scale applications.

Another essential element is that the pole-mounted electrical cabinets also come in different sizes and shapes.

So depending on the number of equipment you want to install, you may choose the particular one which fits you.

9. Walk-in Electrical Cabinets

As at now, you understand that it’s quite evident that electrical boxes can be fabricated to a wide range of designs and sizes depending on the need.

And the walk-in type is arguably one of the largest designs of this equipment that you can ever find in the market.

Ordinarily, the design intends to serve in relatively large buildings and industries.

In most cases, the structure of this device has more than two entry doors.

Walk in electrical enclosure

They often have an open bottom but can you can as well go for one equipped with full floors.

Also, the choice of material that you choose for walk-in electrical boxes is dependent on the particular application and surrounding.

So due to their gigantic size, it would be ideal to go for one that has some additional accessories for efficiency.

For instance, you can choose one that has lifting eyes for easier removal or placement.

The only significant disadvantage is that they occupy relatively large space hence not suitable for small-scale applications.

Materials for Manufacturing Electrical Enclosure

Parenthetically, this is one of the most important aspects which you have to consider when buying an electrical enclosure.

What I mean here is that in many occasions, you’ll find these cabinets available in different types of materials.

The truth nonetheless, is that a wide range of factors determines the choice of material for making specific types of enclosures.

For instance, if the purpose is for outdoor installation, it definitely implies that it has to attain some properties to endure the environment.

Then you also have to consider vandalism, which is apparently becoming a great concern these days.

In a nutshell, you have to choose the material for your electrical cages carefully before importing.

In that case, read on to find a quick guide for the available alternatives to choose from;

i. Stainless Steel Electrical Enclosure

This is arguably one of the most common types of material for manufacturing electrical enclosures.

Necessarily, it is an alloy which contains varying quantities of chromium and nickel.

It’s this combination in addition to other elements that enable this material to be virtually resistant to staining and corrosion.

In many applications, whether indoor or outdoor, this material becomes vital since it has all the ideal properties for both environments.

Stainless steel electrical enclosure

The truth, however, is that this type of material is also available in a wide range of grades.

This results from the ratio difference content of the main elements which make it up.

But what are some of the most common types in the market?

304 and 316 are the popular ones especially for making electrical cabinets.

304 contains 18% Chromium and 8% nickel whereas 316 contains 16% chromium, 10% nickel and 2% molybdenum.

Нержавеющая сталь is quite harder than mild steel and can be challenging to work with.

The best part nevertheless is that it is structurally stronger. Also, it has a relatively low thermal conductivity.

Again, you can use it to make these structures in a virtually uncoated state, whether for indoor or outdoor locations.

Of course, this because it presents a high resistance to corrosion.

But in many instances, you’ll find that the uncoated stainless steel electrical enclosures are polished.

The reason for this is generally to enhance its aesthetic appeal.

It is however somewhat costly than mild steel due to the composition of more expensive metals.

But still, you can use it in many different applications comfortably especially in corrosive environments and coastal areas among others.

ii. Carbon Steel Electrical Enclosure

This is the other type of material that many manufacturers also consider to use in making these appliances.

Carbon steel is suitable for manufacturing safety rated electrical enclosures.

They are ideal for general indoor and outdoor applications where corrosion won’t specifically be an underlining issue.

Carbon electrical enclosure

This material is also widely popular for making these items since it has comparatively several advantages.

Well, in some instances you may refer to it as wrought steel.

One of the best properties of this material is that it’s highly malleable.

So how is this important anyway?

Listen, this malleability is vital in the sense that you can use this material to form any shape with it.

Ordinarily, you can classify carbon steel into four major types, of course depending on the composition of carbon.

Low steel, medium steel, high steel and ultra-high steel are the major categories of this material.

The most important aspect of this material, in this case, is that you can all the different categories to produce enclosures.

It is thus helpful since you can customize it to get what best fits your specific needs.

iii. Aluminum Electrical Enclosure

Aluminum is also typical in manufacturing different types of electrical enclosures for wide-ranging sectors.

This material tends to be comparatively lightweight but not necessarily as strong as stainless steel.

In that case, it means it would be essential if you use thicker sheets.Moreover, aluminum is non-magnetic.

You know this is vital in electrical enclosures since it gets rid of eddy-currents within the cage.

And that’s one of the vital aspects that make this material popular for making these electrical cabinets.

You may not want to read this about the aluminum material, but here we go:

One shortcoming that makes it somewhat unpopular option in comparison to stainless steel is susceptibility to corrosion.

Nonetheless, on a positive note, it rapidly builds up a layer of a whitish substance known as aluminum oxide.

It’s this substance that then seals it from oxygen thus preventing further corrosion.

Again, you can use uncoated aluminum for outdoor applications quite safely.

But remember you have to get painted or powder-coated for enhancing aesthetic appeal.

Some of the applications where you can use this material include outdoor switchboards and coastal areas.

iv. Polycarbonate Electrical Enclosure

A polycarbonate material refers to an unequivocally strong thermoplastic which contains carbonate groups but in their chemical state.

It’s actually one of the best non-metallic material for manufacturing electrical enclosures.

Notably, it has high resistance to corrosion and acidic surroundings making it arguably the best material to go for.

Surprisingly, plastics are some of the best materials with high resistance for impact, scratch, and dents.

You see, what often happens is that you can integrate a polycarbonate material with some coating technologies.

Polycarbonate electrical enclosure

That’s what enable them to develop and maintain the respective properties even when you subject them to harsh conditions.

The other good thing with polycarbonate is that its non-conductive nature gets rid of the need for earth bonding straps to covers.

However, you’ll find out that polycarbonate electrical enclosures are variedly common in smaller applications.

For instance, enclosures for local control stations, meter boxes and marshaling boxes among others.

Ideally, you’ll find several options in the market.

The most significant thing is choosing the right type you know suits your particular needs.

You also need to have it mind that environment for installing this device is also a significant concern.

But in general, all the above material can suitably fit in both outdoor and indoor environments.

And before I forget, you also have to make sure that the particular material you’re choosing meets the standard specifications.

Talking of specifications, let’s find discuss the common standards for electrical enclosures to comply with;

Electrical Enclosure Standards

Listen, industry standards in electrical cabinets aim to promote safety and encourage efficiency.

So you’ll find that the authorities in several countries across the western world enforce the standards for such reasons.

Again, you’ll find out that these units vary dramatically in regards to size, material, structure, and design, albeit sharing common objectives.

These standards are also vital in defining the least levels of product performance.

And it’s the reason you should be particular when buying any type of electrical enclosure. So let’s look at some of the common standards that these devices should comply with.

§ NEMA Standard Enclosure

NEMA refers to the Национальная ассоциация производителей электрооборудования.

This body defines the standards of electrical boxes of various grades common for different applications in America.

This organ also rates each unit to protect against personal access to hazardous components and additional environmental conditions.

Typically, a NEMA enclosure standard might be rated against environmental vulnerabilities like dust, water, coolant, oil, etc.

Ideally, you must also be aware of the fact that NEMA ratings can as well be a source of considerable confusion.

But the standards that they publish are helpful to users in regards to ensuring compatibility safety and proper functioning.

Ordinarily, NEMA ICS 6 classifies types of enclosures depending on their ability to safeguard against damage against liquids, dust and corrosive substances.

Also, you have to know that NEMA defines and publishes the standards of various electrical cabinets and manufacturers’ compliance.

So in summary, NEMA merely conveys ingress progression.

Additionally, it addresses the construction, performance, suitability and other relevant tests.

In general, NEMA basically rates the electrical enclosures by Type and not IP.

It also allows for self-compliance which is vital considering that it won’t be necessary to make manufacturing site assessments.

§ IP Standard

This standard is also known as International Protection or Ingress Protection ratings.

Ideally, it’s defined to the international standard to the extent of sealing efficiency of electrical boxes against intrusion from foreign objects.

Generally, this standard consists of two prefix letters IP and two digits.

The digits are inherently the level of protection which the cabinet provides against solid bodies.

IP rating

The second digit, on the other hand, indicates the level of protection of the equipment inside the cabinet against water.

You’ll come across the different type of IP rating given that various electrical enclosures have different IP standards.

And that’s the reason you must be careful when choosing one that suits your needs.

Alternatively, you may choose to seek the help of a professional electrician to guide you in making the right selection.

§ IEC 60529

This standard is common in European region for measuring the performance criteria of an enclosure by different elements.

IEC rating for every IP level specifies the amount of water that should get into the enclosure.

On the other hand, this standard doesn’t specify the extent of protection against the dangers of explosions, unlike NEMA which does.

So in a nutshell, the IEC 60529 codes identify the levels of ingress protection.

His standard also describes the ability of the cabinet to protect its components from dust, moisture, and people among others.

Additionally, the IEC standard also allows for self-testing.

But some manufacturers often consider having their products tested by an independent testing facility to enforce compliance.

§ UL 50 and 50E

Primarily, the UL’s standards are on the basis of NEMA’s specifications.

Nonetheless, they also enforce compliance via the third party testing on-site assessments.

So if you purchase an enclosure with a UL certification, it’s an indication that the manufacturer is complying with NEMA standards.

Basically, these are some of the conventional electrical enclosure standards in the market.

As you’ve come to see, these ratings are vital especially when it comes to determining performance and safety.

In general, the standards play a significant role in the efficiency of any electrical box.

Components of an Electrical Enclosure

Well, knowing the parts of an electrical enclosure is one of the most critical elements.

Incidentally, this equipment doesn’t necessarily have quite a lot of parts owing to the fact that it’s quite simple.

 An example of an electric enclosure

So in this case, let’s look at some of these parts that you’ll possibly come across when dealing with the type of cabinet;

§ Terminal Boxes

These refer to the electrical components used for converting overhead services to underground services in the multi-circuit wiring.

You install them inside the enclosure boxes for protection, convenience, time-saving and wire splices connections.

Manufacturers use different types of materials to make these devices and also available in various sizes.

Fundamentally, they also come with ideal ingress protection and a wide range of ambient temperatures.

§ Human-machine Interface

This is interface hardware for machine level and stand-alone small process applications connected to a controller.

In electrical enclosures, it enables advanced visualization and integration of various operations into supervisory-level solutions.

In fact, it’s a suitable component for electrical cabinets which require control from an operator from time to time.

Furthermore, it adds aesthetic value to the machine and also provides security of the equipment from unauthorized users.

§ Thermal Management Unit

This is an instrument that monitors various temperatures and cooling methods within the electrical box.

It is typical for controlling the overall temperature of the entire cabinet and that for individual ICs.

Of course, you know that a combination of various electronic devices and circuitry tend to generate excessive heat.

So this is an important component because it provides the ideal temperature to prevent the box from overheating.

The essence of this is that it enhances the general efficiency of the electrical cabinet and preventing any functional failure.

§ Cable Management

Cable management in this case essentially refers to the configuration of electrical cable in a box.

In many instances, depending on the size of cabinet you’re using and a number of devices, the cables may be tangled.

So this in most cases makes it relatively difficult for you to work with the cables effectively.

And in some instances, it may lead to unplugging of devices accidentally as you attempt to move or shift a cable.

It is also vital because it enables installation and subsequent maintenance of the cables within the enclosure somehow easy.

§ Frame

Electrical Enclosure Frame

Frame refers to the entire build of the enclosure.

It’s determined by the shape, size, and material of this particular product.

In most cases, the frame may vary depending on several factors.

It’s mainly the cover of this product which houses all the other components.

§ Lock

The electrical enclosure has entry points irrespective of the design or size.

So these entry points have a lock which is typical for securing the components inside the unit.

Therefore, a lock generally is a part that allows you to safeguard the electrical equipment inside the electrical cabinet.

The importance of this is to provide necessary safety and preventing interference of contents of the box.

§ Earthing

Earthing is a type of low resistance wire that transmits immediate discharge of electrical energy to the earth.

This is a component that connects specific parts of the installation with the conductive surface of the earth.

It is commonly applicable in the electrical enclosure to provide safety and functional efficiency.

Earthing is necessary for this component because it protects you from inevitable short-circuit current.

This parts also protects you and the components inside the electrical enclosure from lightning discharge and high voltage surges.

Well, these are the key parts and components of an electrical cabinet.

However, you may also find additional parts of this device depending on the design, size and applications intended.

Parts and components of the electric enclosure

For that reason, it would be ideal if we look at some of them here albeit briefly

• Sun Shield- it’s the parts that guard the unit against direct sunlight hence preventing it from obtaining unnecessary high temperatures.
• Roof – It refers to the uppermost part of the enclosure that covers the equipment from sunlight, rain or any other foreign object.
• Leg Stands – These are the components that provide support to the unit and raising it relatively above the ground.
• Vent – It refers to specific openings on the frame of the electrical box which helps to facilitate air circulation within the cabinet.
• Window – It is a relatively large open space also on the frame of the cabinet which you can use to access the components. The window also helps to provide sufficient air circulation inside the box.
• Coupling – This is a device which you use for connecting two shafts at their ends to transmit power.
• Drip Shield – It refers to a type of part that prevents water or any liquid substance from getting into the electrical enclosure.
• Door Stay – It is a device for holding the door in position whether closed or open. It is also helpful in preventing the door from opening too widely or from swinging through when closed.

In some instances, you may refer to it as a door stopper, door wedge or doorstop.

• Dead Front – It refers to the operating side of the electrical enclosure that doesn’t contain any live component. The essence is to prevent exposure of an individual to the operating section of the box.
• Gland Plate – It is a device for attaching and securing the end of electric cables inside the electrical box. It is also essential for sealing wires that pass through bulkheads.
• Thru-Hole- It is a hole drilled entirely through a surface material of electrical enclosure object.

Necessarily, these are some of the additional components and parts of the electrical box that you may also come across.

Importantly though, is to understand that they can be available on specific cabinets depending on the suitability of each application.

Well, now that you’ve known the parts and components of these devices, it would be imperative also to comprehend the basic installation process.

And that’s what leads us to the next sub-section in this guide. So let’s have a look;

How to Install an Electrical Enclosure

Now, you know that an electrical enclosure has to be appropriately configured then mounted on a specific position.

But before we talk about the installation process of this device there’s a vitally essential aspect you must know;

The installation process is considerably dependent on the type of application, the environment, and the size of the enclosure.

Steel electrical enclosure

The importance of understanding this is merely to let you know that there could be a few variances in steps for installation.

Projects that would require this component vary from the smallest wall-mount to boxes to entirely walk-in buildings.

And it’s thus important to get an enclosure design that can adapt to any mounting configuration.

Some of the typical applications for mounting this device include wall, pole, pad, walk-in and freestanding among others.

In this case, we want to look at a general perspective of installing this equipment on a wall.

Step 1: Identify the Parts to Fit in the Enclosure

Basically, you have first to ensure that you list down all the electrical components that you want to fit inside this cage.

This will undoubtedly give you an idea of the ideal size you require for your application, whether residential or commercial.

After this, you can now tell the approximate size and design of the enclosure you’ll need thus giving you an easy time to purchase the suitable one.

Step 2: Get the Right Tools

Ideally, installation of an electrical cabinet requires a bunch of tools, of course depending on its size.

Some of the most obvious tools include electric drill, wire stripper, nylon cable ties, safety gloves, masks, and drywall saw.

In other instances, you’d also require utility knife, assorted screwdrivers, network tester, electrician’s snip, and goggles among others.

Just ensure that you have the right tools to enhance convenience and efficiency when installing this component.

Step 3: Mark and Prepare the Enclosure Area

This is actually the first intensive aspect of this installation that you have to undertake.

You must be meticulous at this point because of the availability of live wires running through the studs horizontally.

And if you mess here, then you jeopardize the entire installation system.

To be safe, you should use live wire detectors to determine the right place for locating the enclosure.

Then group all your cables together.

And take a utility knife to start a hole in the drywall.

After that, use the drywall saw to cut the opening.

It is advisable first to cut a small opening to enable you to probe the internal side of the cavity for wiring.

Step 4: Connect Electricity to the Cage

By doing this, you must make sure that you separate low voltage from low voltage.

If possible, get a duplex receptacle to run voltage into your electrical enclosure.

Meanwhile, keep all the line voltage connection outside the enclosure.

The ideal thing to do to achieve this is to run the line voltage below the enclosure.

Step 5: Mount the Enclosure

While doing this, you must consider a wide range of elements because it’s probably the point of no return.

So primarily, you have to get it right since it’s the key aspect of the entire process.

There’s an opening at the bottom of the box which you should leave to allow for easy wiring of the enclosure.

Pull all the necessary wires into the cage and make sure they’re all well-marked.

But never cut the wires that you’ve already pulled inside the box.

In case they’re excessively long, you can always push them into the cavity that’s above the enclosure.

Step 6: Configure the Interior Components

It’s also another fundamental aspect because you need to lay out all the components that will go inside the enclosure.

Essentially, this gives you an overall idea of how you’ll place such devices in the enclosure.

The type and arrangement of the layout will also depend on the number of components that you want to fix.

Again, it’s the size of the enclosure that determines how you configure the interior components.

Step 7: Install the Interior Components One by One

At this point, you’re almost completing the task.

It means that you’re now fixing all the components by the particular layout you’d configured earlier.

When installing these components always ensure that every bit goes to the respective wire.

You should never make a mistake of confusing the cables for specific equipment.

This can be risky since it’s exposing yourself and the components to immeasurable danger.

And if need be, you can seek the services of an expert to help you out.

Step 8: Complete the Wiring Process

Now that every equipment is intact, you can finalize on the wiring of any hanging cables.

It’s at this point that you also need to tighten any loose nut or bolt just as a way of ensuring that all the components are secured.

At this stage, you should also mark the components upon completion of all the wiring processes using unique codes.

This is vital as it enables you to easily access the particular component later on for repair or replacement should it develop issues.

The most important thing on the same is to make sure that you use all the standardized tools to enhance safety in case of an unfortunate event.

Well, as you can see, it is not necessarily a complex process.

Once you have the basic knowledge and the right tools you can quickly complete this task effortlessly.

Also, remember that installation areas may vary depending on the application.

But the installation process is more or less similar. You’ll only have to adjust a few steps.

Nonetheless, the most critical element you should always emphasize on is safety.

Do everything possible to ensure that the entire process is safe before, during and after installation.

Performance Parameters of the Electrical Enclosure

Here’s the truth;

One of the major reasons for electrical enclosure standardization is to guarantee you ideal performance.

You see, several manufacturers are out here producing these products in variety and obviously promising better performance.

However, if you’re not keen or knowledgeable enough, you’ll realize later on that you got a raw deal.

And trust me this equipment can be a considerable investment since some of them are unquestionably expensive.

And for that reason, there’s absolutely no reason to acquire an electrical enclosure that won’t serve you as necessary as possible.

Steel electrical enclosure with a lock

Therefore, you must ensure that you look into various performance factors of the specific model you prefer to purchase.

So let’s look at some of the essential performance elements of electrical enclosures that you need to consider;

i. Thermal Management

Understandably, thermal management refers to the monitoring and regulating of temperature that the electrical enclosure produces.

Undoubtedly, it’s a significant aspect because the temperature has a considerable effect on the reliability and service of this unit.

In fact, in most cases, failures and malfunctions of electrical boxes are always a result of the thermal issue.

So is there a way poor thermal management affects the efficiency of this type of unit?

Yes, indeed badly, that’s the short answer.

In manufacturing and other sectors like banking, a one-hour downtime can lead to the loss of a significant amount of money.

If you want to manage the thermal activity of the box to the optimum, you have to be meticulous and always plan.

But of essence is to ensure that you strike the right balance between internal and external temperatures of your enclosure.

An ideal way of attaining this is carrying out a thermal analysis from time to time.

In a great way, this factor determines the performance of the electrical enclosure hence inherently critical to consider.

ii. Safety and Environmental Compliance

This is the other fundamental element that you also have to consider as a performance determinant factor.

Incidentally, electrical equipment for that matter has to comply with the safety and environmental standards.

You see, this compliance is an assurance of its suitability and efficiency in various applications.

So you should never consider an electrical enclosure that does not meet any of these basic standards.

Safety, in this case, implies securing your wellbeing as the main user and that of the second and third party users.

And from the environmental perspective, an electrical cabinet should also offer safety not to jeopardize other properties within the surrounding.

Primarily, you’ll find out that most of the time strict stipulations concerning human and environmental safety are fundamental.

Considerably, they determine the overall performance of the box.

I bet you can’t even bother to get closer to any electrical component that is somewhat risky to your wellbeing.

iii. Protection Features

Another factor that also determines that the performance of an electrical enclosure is the safety features its presents.

Ordinarily, the regulators expect all manufacturers of these units to incorporate a wide range of protection features.

Of course, the interest, in this case, is to enhance efficiency by offering optimum protection when using this equipment.

So protection features play a significant role in the entire process of handling and controlling any electrical cabinet.

Applications of Electrical Enclosures

As you’ve seen in the earlier sections of this guide, it is quite clear that electrical enclosures can be applicable in various sectors.

But then you must also know that several factors often determine the choice of the preferable enclosure for the specific application.

While we’re on the subject, choosing the design or type that is wide of the mark can be a risky and costly mistake.

So let’s briefly look at some of the notable applications of this equipment;

§ Traffic Control

The traffic lights obviously use a variety of items which rely on electrical energy in a significant way.

But you see you can never install all the electrical components of traffic lights such as switch control openly.

Traffic control electrical enclosure

And that’s where the traffic control enclosures become handy.

Different municipals and traffic departments all over the world use enclosures to store the relevant devices.

Remember traffic control is a critical element and it must be in a systematic manner to prevent unnecessary inconveniences and confusion.

§ Street Lighting

Again, most of the streets in various countries have different types of lights along their roads.

Apparently, all these lights are controlled from a specific point which holds all their necessary electrical accessories.

Street light with electrical enclosure – Photo courtesy: VORPENERGY

Of course, you can’t have each street light with its switch or independent connection.

Therefore, electrical enclosures become significant in making sure that the electrical accessories are confined to a central point.

§ Telecommunications

Enclosures are also essential in the telecommunication sector since they protect electrical equipment that conveys voice, data, and video.

Telecom equipment is sensitive hence the need for protecting them especially from elements that might cause unnecessary interruptions.

It follows that most of the telecommunication companies rely on customized enclosures which can meet their different needs.

§ Solar Power Battery

In most instances, relatively heavy batteries for solar panels require a box.

It’s this box that helps such outdoor batteries to attain the necessary conditions for maintaining their productivity.

So you’ll find that enclosures become handy in such instances because they make it possible for the battery to stay safe.

Solar light with electrical enclosure – Photo courtesy: REXEL ENERGY SOLUTIONS

The design of such boxes also facilitates cooling of the enclosure and removal of gases that such batteries release.

And also remember that this always possible because the solar boxes are durable and come with extra strength.

§ Tower Mounts

Tower mounts are also the other areas where the use of enclosure boxes is common.

Ordinarily, you’ll find tower mounts for various applications such as wind, solar, satellite and radio equipment using these boxes.

Free standing electrical enclosure

They help significantly in ensuring that such equipment are useful in playing their particular roles while in ideal conditions.

§ Food and Beverage

A wide range of food and beverage manufacturers also use electrical cabinets for storing electrical equipment for their machines.

Listen, in any ordinary food and beverage company; you’ll find various devices that play different roles throughout the process.

Electrical enclosure for PLC

For instance, you’ll find electrical boilers, dryers and lifting columns machines among others.

And for that reason, all the appropriate electrical control systems have to be centralized in a central safe place.

And that’s where the electrical enclosures become essential.

§ IT and Servers

This is also the other areas where the application of electrical enclosure is predominantly apparent.

Often, you’ll find them in different configurations in this sector given that they have to comply with industrial standards.

Electrical enclosure for servers

What happens is that different applications use different types of server racks and cabinets.

But the bottom line is that they are vital in making sure that all the crucial elements of the servers are concealed safely.

§ Cable/Wire Management

If you’ve been to companies that manufacture various industrial products in bulk, you must have noticed how several cables are interconnected.

These interconnections are a way of integrating various devices to work seamlessly hence guaranteeing top-notch efficiency.

But then, it’s always vital to arrange and manage such electric cables within the factory because they transmit large voltage.

So to prevent any possible risks configuring all the cables and consolidating them in one enclosure helps considerably.

Therefore in general, these electrical cabinets help to manage such cables effectively.

§ Oil and Gas Industry

Typically, the environment surrounding oil and gas presents somewhat harsh climatic conditions.

This can be serious to the extent of the various electrical components reacting with the environmental conditions and causing disasters.So to avoid all these, the electrical enclosures become handy.

In fact, there are specific standards of enclosures that you can place within the confines of the oil and gas factory.

And that’s why you’ll see them in various companies that handle the oil and gas.

§ Wastewater Treatment Plants

It also another vital area where the use of electrical enclosures is common.

Well, the water treatment plants surrounding is often harsh and somewhat unfavorable to many elements.

Electrical Enclosure for pumps

But these design of the devices suitable for such areas incorporate properties that would enable them to endure such conditions.

They are specifically used for storing the electrical devices such as fuses, switches, etc. for the water treatment machines.

§ Industries

Understandably, you can hardly find any factory without electrical enclosure regardless of the type of service or product it offers.

Factories often use various electrical equipment to facilitate production and productivity.

And again, many activities always take place in such environments simultaneously.

So the best way of safeguarding employees and other devices within the factory is by enclosing such components in a cabinet.

Electrical enclosure for IBC bin blender

It also becomes easy to manage the operations of various electrical machines.

Well, these are some of the typical applications of electrical enclosures.

The truth, however, is that these devices are almost available in all areas where there’s use of various electrical instruments.

In fact, even in residential homes, you can have them as long as they can serve the specific purposes they’re designed to do.

Control Console

Electrical enclosure are widely used for different control console like Vibratory Dryer, Vibratory finishing machine and more.

KDMSteel: Your best Electrical Enclosures Manufacturer for Industrial Applications

There’s one fundamental aspect that I’ve not talked about in this guide, and it would be of great injustice if I don’t state it.

Now, as you can clearly see from this guide, electrical enclosures entail several elements.

And incidentally, making the right choice depending on the specific applications and needs might be somehow confusing.

Indeed, the only way of attaining peace of mind upon purchasing and installing this type of equipment is by buying from a reliable manufacturer.

KDMSteel is one of such manufacturers to seek these products from.

With their specialty in manufacturing flawless stainless steel design enclosures, trust me you can never go wrong with them.

It has been in the industry for over ten years with a specialty in customized stainless steel electrical equipment.

I mean, that’s a great indication of attaining nothing short of the best and most suitable electrical enclosure for your needs.

So just to make you work easy and save yourself from hustles surrounding purchasing these items, simply make your order to KDMSteel.

Conclusion

Hopefully, this guide has been an eye-opener to you.

I’m sure after reading it in entirety you can now confidently head to a particular store and select the best electrical enclosure.

And of course, that was the intention of this guide.

At least to get you to grasp some basic ideas regarding this electrical equipment to make it easy for you to select and purchase one.

But I also acknowledge the fact that at times, you may need additional information that you probably didn’t understand.

Or still, you would merely need to get further clarification regarding the subject of this guide.

If so, don’t hesitate to contact us.

Our support staff will always be available to handle your issue or concern any moment you wish to.